Skin wrinkles and blemishes
Description
An in-depth report on the treatment and prevention of skin wrinkles and blemishes.
Alternative Names
Liver spots; Pupura; Seborrheic keratoses; Cosmetic surgery; Plastic surgery
Resurfacing Treatments
Choosing a Resurfacing Approach
There are many choices for skin resurfacing (also called exfoliation), and the patient must consider several different factors that affect the choice. Resurfacing can achieve the following:
-
Removal of abnormal tissue and rough skin
-
Stimulation of new skin growth
-
Stimulation of collagen and elastin production
In addition to determining the skill of the surgeon and the safety of the procedure, the patient must discuss the desired depth of the resurfacing and the capability of each procedure to reach this depth safely. All resurfacing procedures require a healing period afterward, during which the skin is red and sensitive. The deeper the procedure, the higher the risk for complications, including delayed healing, infection, loss of pigment (skin color), and scarring.
If you make the decision to pursue intensive treatments, consider the following factors, among others, and discuss them with your dermatologist or plastic surgeon:
-
The ability of the procedure to safely reduce wrinkles
-
The ease and safety record of the procedure
-
The skill of the doctor
-
The length of recovery
-
Possible complications
-
How long the benefits will last
A person's age also helps determine the procedure:
-
For people in their thirties, a simple chemical peel is sufficient.
-
After age 40, people may benefit from collagen or fat implants.
-
At age 50 and over, plastic surgeons recommend laser resurfacing and customized treatments for individual needs.
In older individuals, combination procedures may be beneficial. Some examples include the following:
-
Laser surgery may be used for deep lines (such as those around the mouth) and chemical peels used over the rest of the face.
-
For enhancing the eye by correcting droopy eyelids, bags, and a "sinking" brow, combinations of eyelift (blepharoplasty), Botox, and laser resurfacing may be used.
Chemical Peels
Chemical peels, also known as chemosurgery, help restore wrinkled, lightly scarred, or blemished facial skin. Much like chemical paint strippers, chemical peels strip off the top layers of skin, and new, younger-looking skin grows back. A total of 556,172 of these procedures were performed in 2005. The procedure is very effective for the upper lip but cannot be performed around the eyes. Partial peels are often done in conjunction with a face-lift. Combinations of the topical antioxidants, such as tretinoin and vitamin C, along with a chemical peel, may be particularly effective.
The Procedure.
-
A dermatologist applies chemicals to the skin. They include trichloroacetic acid, high concentrations of alpha hydroxy or beta hydroxy acids, or combinations of all three.
-
In some cases, tretinoin or alpha hydroxy is applied 4 - 6 weeks before, and starting one day after, the peel. Such treatments can enhance the effects of a peel and reduce the risk of discoloration in people at risk for this complication. Tretinoin is being tested as a chemical peel. In one small 2001 study, it effectively reduced wrinkles with no side effects.
-
A crust or a scab generally forms within 24 hours after surgery, which can be removed by gentle cleansing with soap and water.
-
The skin takes six or seven days to heal.
-
After the scab disappears, the visible skin is deep red but gradually lightens as it regenerates.
Complications.
Complications include white heads, cold sores, infection, scarring, numbness, and permanent discoloration, particularly in people with darker skin. Refinement of chemical peel techniques are now permitting doctors to reach deeper skin, improvements which make it easier to apply peels to non-facial skin and to individuals with darker skin.
Dermabrasion
Dermabrasion affects deeper layers of skin than chemical peels, and may be useful for removing disfiguring marks, such as deep acne scars or deep wrinkles. As with chemical peels, it is effective for wrinkles on the upper lip and chin, and cannot be used around the eyes. Some experts prefer dermabrasion to lasers for skin surfacing of people with darker skin colors.
Standard Dermabrasion.
Standard dermabrasion uses a rotating brush that removes the top layers of a person's skin. As with chemical peels, dermabrasion selectively strips away the upper layers of skin, leaving the underlying skin layers exposed. Similar to chemical peels, after the procedure, the treated skin oozes and forms a scab, a reaction that looks and feels uncomfortable, but only temporary. Postoperative care is similar for both procedures.
Microdermabrasion.
A gentler variation called microdermabrasion uses very tiny crystals to polish the skin and a vacuum technique to remove them. It has largely replaced the older dermabrasion, and, in fact, was the fourth most common non-surgical cosmetic procedure performed in 2005, with over a million done. Results are similar to light chemical peels. Patients can have this procedure done on their lunch hour and return to work. Only mild redness occurs after treatment, although for best results five or six repetitive treatments are needed every 1 - 2 weeks. To date, overall patient satisfaction has been very high.
Laser Resurfacing
Lasers are currently the most effective exfoliation tools for eliminating wrinkles. Their unique advantages over other resurfacing methods are their ability to tighten the skin. A successful procedure can make patients look 10 - 20 years younger, and the results can last up to 10 years.
The procedure is most beneficial for the following areas:
-
It is best around the mouth and eyes. Recent evidence suggests CO
2
lasers may be even better than dermabrasion for the upper lip.
-
It is slightly less beneficial for the area around the nose.
Used alone, current laser therapy does not eliminate crow's feet, broken blood vessels, or dark circles under the eye. The evidence of the effects of lasers on acne scars is incomplete.
Standard laser dermabrasion is too harsh for thinner skin layers, such as on the neck. Newer and gentler laser techniques, however, stimulate collagen without removing skin layers, and may prove to be useful for necklines.
The Laser Resurfacing Procedure.
In general the procedure works in the following way:
-
Laser pulses penetrate the skin quickly, vaporizing water and surface skin without damaging the deeper layers, allowing new top skin to grow.
-
In addition, enough heat is applied to shorten collagen fibers, restoring some elasticity to the skin.
Choice of Lasers
. The lasers used depend on skin type and severity of the condition. Some of the more common laser types are:
-
The carbon dioxide (CO
2
) laser. This is the most powerful laser treatment and is used for deep wrinkles and skin imperfections. People who have had silicone injections should not have CO
2
procedures, which can burn and scar the skin over the implanted area.
-
The erbium: YAG (Er:YAG). This laser is gentler than the CO
2
laser, and is effective for mild wrinkles and for providing a smooth skin texture. It has a shorter recovery time. Some experts have even found the YAG laser as effective in removing deep wrinkles as CO
2
when used to sufficient depth. A variable pulse YAG laser can shift between pulses that destroy skin tissue to those that heat the skin. This process effectively resurfaces the skin with fewer side effects than CO
2
laser therapy.
-
Pulsed dye laser. Pulsed dye laser uses yellow light, which is easily absorbed by hemoglobin, the molecule that gives blood its red color. Pulsed dye laser treatments are used to treat skin blemishes that are due to blood vessel abnormalities, such as port-wine stains.
A gentle laser procedure called non-ablative laser resurfacing (NLite), also called photorejuvenation, is now approved for the treatment of all facial wrinkles. The procedure uses light energy to gently stimulate new collagen, and possibly elastin production, without removing the skin tissue itself. Its effects are less pronounced than those of other laser procedures. However, because it does not injure the external layers of skin, it can be used on delicate skin areas, such as the neck and around the eyes. It also causes very little irritation afterward.
Some surgeons are using combination techniques that employ more than one laser technology in one session, to achieve different effects. For example, one combination technique uses CO
2
, YAG, pulsed-dye laser, and one other laser technology to both improve wrinkles and clear under-eye dark circles and acne scarring. Pretreatment with botulinum (Botox) injections before laser resurfacing significantly improved the treatment of crow's feet in one 2001 study.
Post-Procedure Recovery.
The procedure itself is relatively painless, but the redness and irritation that occur during the healing process can be severe. Non-ablative laser resurfacing does not have the same severe after-effects as other laser treatments. For 8 - 9 days, the face looks skinned and swollen, and requires continuous moisturizing. Some experts suggest that people with very sensitive skin, who cannot tolerate the necessary medications and lubricants, should avoid laser resurfacing. Redness and sensitivity can persist for 1 - 4 months. The patient must stay out of the sun as much as possible during this time, and should always avoid sunbathing and damaging their skin again. Early research suggests that silicone dressings may reduce post-procedure pain and crusting.
Complications.
Scarring and infections can occur in about 1% of procedures. The risk of complications depends on the experience of the surgeon. People with a history of herpes simplex may experience flare-ups of fever, facial pain, and flu-like symptoms for 5 or 6 days after the procedure. In addition, people with darker skin may wish to avoid the procedure, because it can cause unpredictable and dramatic lightening of the skin.
A new skin rejuvenation technology, called Plasma Skin Resurfacing, or Portrait Plasma, was introduced in February 2005. The technology uses plasma energy (heat and light energy) to rejuvenate the skin from the deeper layers outwards. While new skin regenerates, the outer layers of the skin act as a natural bandage. When the outer layers peel off in the week after treatment, the new skin emerges. The process prevents or minimizes the raw appearance that follows laser treatments. This system uses radio waves to "excite" nitrogen gas, resulting in the release of energy. According to the manufacturer, skin regeneration using the Portrait Plasma system is rapid, and satisfaction with the procedure appears high. Long-term follow-up studies are not available yet for this new method.
Other Exfoliation Procedures
Cold Ablation.
Cold ablation, called coblation for short, delivers saline (salt water) to the skin, through which a cool electric current is passed. A subsequent reaction heats and vaporizes the top shallow layer of skin. The procedure is very specific and appears to minimize any damage to other areas of the skin.
Radiofrequency Resurfacing.
A promising technique uses low radiowave energy to resurface the skin. Preliminary research indicates that this procedure may eventually be as effective as laser surgery in reducing severe wrinkles around the eyes and mouth, with minimal pain and a shorter recovery time. In a 2003 study, one treatment with a topical anesthetic resulted in tighter facial skin for 14 out of 15 patients within 12 weeks. All but one patient returned to normal activity immediately afterward. A small clinical trial published in
Dermatology Surgery
found that a noninvasive radiofrequency technique called NARF safely and effectively improved drooping lower eyelids.
Intense Pulsed Light.
Intense pulsed light (IPL) uses filters to deliver different wavelengths of light. Doctors use it to treat a number of photoaging skin problems, and it appears to have long-term effects. Typically, four to six treatments are performed over a four-month period. Each treatment takes 15 - 20 minutes. Unlike laser light, which uses one color wave-length (such as green or red), intense pulsed light starts with a full spectrum of light. It then allows the doctor to selectively block off specific wavelengths, depending on how shallow or deep the procedure should go. IPL machines are less expensive and safer than lasers.
-
Review Date: 9/3/2006
-
Reviewed By: Harvey Simon, M.D., Editor-in-Chief, Associate Professor of Medicine, Harvard Medical School; Physician, Massachusetts General Hospital
|
A.D.A.M., Inc. is accredited by URAC, also known as the American Accreditation HealthCare Commission (www.urac.org). URAC's
accreditation program
is the first of its kind, requiring compliance with 53 standards of quality and accountability, verified by independent audit. A.D.A.M. is among the first to achieve this important distinction for online health information and services. Learn more about A.D.A.M.'s
editorial process
. A.D.A.M. is also a founding member of Hi-Ethics (www.hiethics.com) and subscribes to the principles of the Health on the Net Foundation (www.hon.ch).
|
The information provided herein should not be used during any medical emergency or for the diagnosis or treatment of any medical condition. A licensed medical professional should be consulted for diagnosis and treatment of any and all medical conditions. Call 911 for all medical emergencies. Links to other sites are provided for information only -- they do not constitute endorsements of those other sites. © 1997-2007
A.D.A.M., Inc. Any duplication or distribution of the information contained herein is strictly prohibited.